Home > News > Content
Product Categories

How To Improve The Efficiency Of Plasma Cutting Machine

Shandong Rayman Machinery Co.,Ltd | Updated: Mar 03, 2018

Generally, the best cutting speed range of plasma cutting can be selected or experimentally determined according to equipment description. However, due to the thickness and material of the workpiece to be cut (such as ferrous metals such as copper, stainless steel, galvanized steel, aluminum, carbon steel and the like Non-ferrous metals), the level of melting point, the size of the thermal conductivity and the surface tension after melting and other factors, so the plasma cutting machine CNC cutting speed also has the corresponding changes. The main performance of the following points:

The company is located in:

1, CNC plasma cutting machine to improve the cutting speed can improve the quality of the incision, the incision slightly narrowed, the incision surface is more smooth, and can reduce the deformation.

The company is located in:

2, the plasma cutting machine when the cutting speed is too fast to make the cutting line energy is lower than the required value, the jet can not be quickly cut the molten melt immediately blown away to form a larger amount of trailing drag, with Cut with dross, the surface quality of the incision.

The company is located in:

3, when the plasma cutting machine in the cutting speed is too low, because the cutting is the plasma arc anode, in order to maintain the stability of the arc itself, the anode spot or the anode area must be near the arc near the current to find the conduction current, At the same time, it will transfer more heat to the radial direction of the jet, so that the incision is broadened. The molten materials on both sides of the incision are gathered and solidified at the bottom edge to form dregs which are hard to be cleaned, and the upper edge of the incision is formed due to excessive melting by heating Rounded corners.

The company is located in:

4, when the plasma cutting machine CNC cutting speed is very low, due to the incision is too wide, the arc will even go out. Thus, a good cutting quality and cutting speed are inseparable.


Services & Products
Portable CNC Cutting Machine
CNC gantry cutting machine
Desktop CNC Cutting Machine
Intersecting Line Cutting Machine
Pipe Cutting Machine
Metal Portable Thermal Cutting Machine
Contact Us
Tel: 0086-0537 2817888
Fax:0086-0537 2580005
Add:Jining City, Shandong
Whatsapp:+8615668175505
Phone:+8615668175505
E-mail:info@rmcutter.com
Feedback